Open-air cinema
Organize a screeningFree or ticketed?Start an outdoor cinemaCampsites & holiday parksBeach cinemaOpen-Air Movie ScheduleThe live skyAccessories & tools
AccessoriesCinema packagesComprehensive solutionsScreen rentalComparisonInstructions for useTools
Screen ConfiguratorTent ConfiguratorFurniture ConfiguratorLounge configuratorArch configuratorAirtight side viewBlower side viewInflatable structures
An inflatable arch marks the entrance to an event, the finish line of a race or the entrance to an outdoor cinema screening. Two families: the airtight arch, inflated once with a pump and standing all day without a blower or extension lead, and the arch with an integrated blower, whose blower is sewn into the arch — no external inflator; plug it in and it stands in one minute. From 7 to 40 ft wide, in 420D Oxford fabric, sublimation printed in your colors.



Trail, city run, triathlon: the arch displays the timing, the event name and the sponsors, and it's visible from afar in the finish line photo.
At the entrance to the screening, the arch says this is where it happens. We also design the screen: both go together.
An entrance you cannot miss, set up in the morning by one person: without a cable on the ground with the airtight arch, or plugged into the stand socket with the arch with integrated blower.
Pump inflation, then nothing: the TPU bladder holds the air, the 420D Oxford fabric takes shape. No running blower, no cable to run, no noise. It's the arch for races, inaugurations and open-air cinemas, where electricity is lacking or intrusive.
The blower is integrated into the arch and included in the price: no external inflator to provide. It stands in one minute and folds away in thirty seconds, but stays plugged in throughout the event. With no bladder, it is not airtight: the right choice when power is available and the arch needs to go up and down several times a day.
An out-of-range width, a special shape, an enlarged base for difficult ground: manufacturing accepts custom shapes from a single piece. We have already delivered an arch with a 8 ft opening for a shop threshold.
The TPU bladder holds the air: inflate once, with no blower running during the event.
Reference = width / height / tube diameter, in meters; on an arch with leg frame, a fourth number gives the frame height. The large widths come in two heights and two diameters: the 36 in tube makes a more massive arch, steadier in the wind.
The classic shape, 14 to 40 ft: square or bevelled corners, your choice, same price.
| Reference | Size | Quote |
|---|---|---|
| CA-5/3.2/0.6 | 197×126(H)×24 in | |
| CA-4/2.6/0.45 | 158×103(H)×18 in | |
| CA-6/3.8/0.6 | 237×150(H)×24 in | |
| CA-6/3.8/0.8 | 237×150(H)×32 in | |
| CA-8/4.6/0.8 | 315×182(H)×32 in | |
| CA-8/4.8/0.9 | 315×189(H)×36 in | |
| CA-10/4.8/0.8 | 394×189(H)×32 in | |
| CA-10/4.8/0.9 | 394×189(H)×36 in | |
| CA-10/5.8/0.9 | 394×229(H)×36 in | |
| CA-12/4.8/0.9 | 473×189(H)×36 in | |
| CA-12/5.8/0.9 | 473×229(H)×36 in |
A tubular frame, 5 to 9 ft, at the foot of each column, for a steadier arch. Square or bevelled corners, same price.
| Reference | Size | Legs | Quote |
|---|---|---|---|
| CA-4/2.6/0.45/1.4 | 158×103(H)×18 in | 56 in | |
| CA-5/3.2/0.6/2 | 197×126(H)×24 in | 79 in | |
| CA-6/3.8/0.6/2 | 237×150(H)×24 in | 79 in | |
| CA-6/3.8/0.8/2.4 | 237×150(H)×32 in | 95 in | |
| CA-8/4.1/0.6/2 | 315×162(H)×24 in | 79 in | |
| CA-8/4.6/0.8/2.4 | 315×182(H)×32 in | 95 in | |
| CA-8/4.8/0.9/2.5 | 315×189(H)×36 in | 99 in | |
| CA-10/4.8/0.8/2.4 | 394×189(H)×32 in | 95 in | |
| CA-10/4.8/0.9/2.5 | 394×189(H)×36 in | 99 in | |
| CA-10/5.8/0.9/2.5 | 394×229(H)×36 in | 99 in | |
| CA-12/4.8/0.9/2.5 | 473×189(H)×36 in | 99 in | |
| CA-12/5.8/0.9/2.5 | 473×229(H)×36 in | 99 in |
A full round arch, 14 to 33 ft: the finish line of races and marathons.
| Reference | Size | Quote |
|---|---|---|
| CA-R-4/2.2/0.4 | 158×87(H)×16 in | |
| CA-R-5/2.7/0.45 | 197×107(H)×18 in | |
| CA-R-6/3.25/0.6 | 237×128(H)×24 in | |
| CA-R-7/3.75/0.6 | 276×148(H)×24 in | |
| CA-R-8/4.25/0.8 | 315×168(H)×32 in | |
| CA-R-9/4.8/0.9 | 355×189(H)×36 in | |
| CA-R-10/5.3/0.9 | 394×209(H)×36 in |
One column and half the lintel, for a doorway against a wall or a two-piece setup; also available as a single column.
| Reference | Size | Quote |
|---|---|---|
| CA-D-2.1/3.6/0.6 | 83×142(H)×24 in | |
| CA-D-2.23/3.8/0.8 | 88×150(H)×32 in | |
| CA-D-2.23/4.5/0.8 | 88×178(H)×32 in | |
| CA-D-H3.54/0.8 | 32×140(H)×32 in |
The blower is integrated and included: no external inflator; the arch stays plugged in during the event. With no bladder, it is not airtight; it sets up in one minute.
Integrated blower included, 250 W for the 20 ft arch, 480 W above that; no external inflator. From 20 to 33 ft, for events where power is available.
| Reference | Size | Quote |
|---|---|---|
| CA-SF-6/4/1 | 237×158(H)×40 in | |
| CA-SF-8/4.8/0.9 | 315×189(H)×36 in | |
| CA-SF-8/4.8/1 | 315×189(H)×40 in | |
| CA-SF-7.9/4.7/1.2 | 312×186(H)×48 in | |
| CA-SF-10/5/1.3 | 394×197(H)×52 in | |
| CA-SF-10/5/0.9 | 394×197(H)×36 in |
All day long, and more: the TPU bladder is designed to hold air. Just a quick pump in the morning of a second day is enough. For a multi-day outdoor setup, simply check the pressure after a cold night, as the air contracts.
Yes. Printing is done by sublimation into the fabric fibers, on the faces you choose: logos, text, solid colors, photos. It doesn't flake and it's washable. Send us your files, we'll send you a visual to approve before production.
Each arch comes with its anchor points. On grass or soil, stakes; on asphalt or slabs, ballast bags at each foot. Beyond established strong winds, the arch is laid flat: it's an inflatable, not a permanent structure.
Count the visual validation, then manufacturing and shipping. A printed arch takes a few weeks; a solid color arch from the range ships faster. Give us your event date in the quote request, we'll tell you if it's feasible.
Deflated, it folds into its fabric bag and travels in a box: one person can carry it, it fits in a car trunk. It is stored dry, away from the sun.
We sell. For a one-time need, ask us for a quote anyway: depending on the size and date, we sometimes have a solution.
| Reference | Name | Description |
|---|---|---|
| CA-EP | Electric pump | Inflate the arche in minutes, in the delivery country's power grid |
| CA-HP | Manual pump | To inflate or top up pressure without electricity |
| CA-ACC-1 | Ropes/Stakes | Ground anchoring: stakes for grass, ropes for large widths |
| CA-ACC-2 | Spare valve | Spare part, to keep with the inflatable screen |
Airtight arch: a 420D Oxford fabric cover over an inner TPU bladder; the bladder retains the air, while the fabric gives it shape and receives the print. Arch with integrated blower: the same 420D Oxford fabric, without a bladder, continuously inflated by its blower. White fabric is in stock; other colors are printed.
Sublimation in the fiber: bold colors, wash and sun resistance, no peeling film.
Airtight arch: unfold, inflate with a pump, close the valve, anchor the feet. Arch with integrated blower: unfold, anchor, plug in — no external inflator. One person is enough for a 14 to 20 ft arch; allow two for larger arches, to hold it upright during inflation.

Tell us the width, the date, and what you want printed on it. You will receive a quote and a visual to validate.
Choose a reference in the range above, or describe what you need in the message.